Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her

RAMmount

Viser 1-60 av 5512 produkter
745,-
596,-  ekskl. mva
Vårt lager på Furuset (PUP) Antall 17 Leverandørlager (1-3 arbeidsdager) Antall 1+
1 718,-
1 374,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 12 Leverandørlager (1-3 arbeidsdager) Antall 1+
783,-
626,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 20 Leverandørlager (1-3 arbeidsdager) Antall 1+
913,-
730,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 4 Leverandørlager (1-3 arbeidsdager) Antall 1+
949,-
759,20  ekskl. mva
Vårt lager på Furuset (PUP) Antall 10 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT X-Grip® M- phoneholder B-size
Varenr.: RAM-HOL-UN7-400U
The RAM-HOL-UN7-400U consists of the small Tough-Claw™ base and universal RAM® X-Grip® cradle. The RAM® X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your smart-phone behind foam pads and plastic. The RAM® X-Grip® cradle expands and contracts for perfect fit of most smart phones. This mount rotates 360 degrees. The RAM® X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14"
1 238,-
990,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 8 Leverandørlager (1-3 arbeidsdager) Antall 1+
812,-
649,60  ekskl. mva
Vårt lager på Furuset (PUP) Antall 8 Leverandørlager (1-3 arbeidsdager) Antall 1+
1 779,-
1 423,20  ekskl. mva
Vårt lager på Furuset (PUP) Antall 3 Leverandørlager (1-3 arbeidsdager) Antall 1+
724,-
579,20  ekskl. mva
Vårt lager på Furuset (PUP) Antall 1 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT RAM MOTORCYCLE BASE W HOLE M8 SCREW
Varenr.: RAM-B-367U
Have an M8 by 25, 30, or 35mm handlebar bolt? The RAM-B-367U will replace that bolt with a standard ball-mount to put just about anything there! Included with Purchase: (1 QTY) 1" Rubber ball (1 QTY) M8 x 55 bolt (1.25 thread pitch) (1 QTY) M8 x 60 bolt (1.25 thread pitch) (1 QTY) M8 x 65 bolt (1.25 thread pitch) Compatible Motorcycles: Any motorcycle which employs an 8mm bolt or smaller on its structure. A smaller bolt can be used, though the load capacity decreases with the bolt size.
Type: Stativ
297,-
237,60  ekskl. mva
Vårt lager på Furuset (PUP) Antall 16 Leverandørlager (1-3 arbeidsdager) Antall 1+
750,-
600,-  ekskl. mva
Vårt lager på Furuset (PUP) Antall 1 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT X-GRIP UN10 TETHER
Varenr.: RAM-HOL-UN10TU
The RAM® X-Grip® is one of the best-selling, most trusted device mounts on the market. The RAM® X-Grip® provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environments, you can ensure added piece-of-mind with the RAM® X-Grip® Tether. The RAM® X-Grip® Tether is recommended for out-of-cockpit applications where excessive wind and G-force could cause movement of the device within the holder. It’s also great if you just want a little added stability and vibration control when capturing video from the mount. The Tether is made of high-strength elastomeric material and fits around the RAM® X-Grip® holder for easy device insertion.
110,-
88,-  ekskl. mva
Vårt lager på Furuset (PUP) Antall 2 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT X-GRIP UN7 TETHER
Varenr.: RAM-HOL-UN7TU
The RAM® X-Grip® is one of the best-selling, most trusted device mounts on the market. The RAM® X-Grip® provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environments, you can ensure added piece-of-mind with the RAM® X-Grip® Tether. The RAM® X-Grip® Tether is recommended for out-of-cockpit applications where excessive wind and G-force could cause movement of the device within the holder. It’s also great if you just want a little added stability and vibration control when capturing video from the mount. The Tether is made of high-strength elastomeric material and fits around the RAM® X-Grip® holder for easy device insertion.
Type: Rack / Tilbehør
99,-
79,20  ekskl. mva
Vårt lager på Furuset (PUP) Antall 3 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT S- RAM arm, 2.38", C-size
Varenr.: RAM-B-201U-A
The RAM-B-201U-A, Short length double socket arm, has a socket at both ends that accommodates B Size 1" balls. RAM's socket technology allows for almost infinite adjustment to achieve the perfect viewing angle. Dimensions: Overall Length: 2.38" Socket-To-Socket Length: 1.75" NOTE This product does not include the pin spring
Type: Stativ
375,-
300,-  ekskl. mva
Vårt lager på Furuset (PUP) Antall 20 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT UNPKD RAM CYCLE STEM BASE W/ 1" DIA BALL
Varenr.: RAM-B-342U
The RAM® Motorcycle Fork Stem Base is one of the cleanest and most popular solutions for mounting your device cleanly on the center of your bike. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 - 33mm (.5” – 1.29”).
Type: Stativ
467,-
373,60  ekskl. mva
Vårt lager på Furuset (PUP) Antall 10 Leverandørlager (1-3 arbeidsdager) Antall 1+
988,-
790,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 1 Leverandørlager (1-3 arbeidsdager) Antall 1+
708,-
566,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 1 Leverandørlager (1-3 arbeidsdager) Antall 1+
1 232,-
985,60  ekskl. mva
Vårt lager på Furuset (PUP) Antall 1 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT RAM base, AMPS, B-size
Varenr.: RAM-B-202U
The RAM-B-202U consists of a B Size 1" diameter rubber ball connected to a flat 2.5" diameter plate. This mount has pre-drilled holes, including the universal AMPs hole pattern.
Type: Stativ
222,-
177,60  ekskl. mva
Vårt lager på Furuset (PUP) Antall 334 Leverandørlager (1-3 arbeidsdager) Antall 1+
542,-
433,60  ekskl. mva
Vårt lager på Furuset (PUP) Antall 39 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT RAM Rail base, U-bolt, B-size
Varenr.: RAM-B-231ZU
The RAM-B-231ZU consists of a B size 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5". U-Bolt Dimensions: Accommodates rails from 0.5" to 1.25" in diameter.
Type: Stativ
428,-
342,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 12 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT RAM diamond adapter, B-size
Varenr.: RAM-B-238U
The RAM-B-238U consists of a B size 1" diameter rubber ball on a 2.43" x 1.31" diamond plate. The plate has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM mounts and third party cradles.
Type: Stativ
206,-
164,80  ekskl. mva
Vårt lager på Furuset (PUP) Antall 36 Leverandørlager (1-3 arbeidsdager) Antall 25+
RAM MOUNT RAM BASE W/ 9 MM HOLE AND 1" BALL
Varenr.: RAM-B-272U
The RAM-B-272U consists of a 1" diameter ball and base with 9mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-272U is BMW.
Type: Stativ
365,-
292,-  ekskl. mva
Vårt lager på Furuset (PUP) Antall 4 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT RAM 1" TRACK BALL WITH T-BOLT ATTACHMENT
Varenr.: RAP-B-354U-TRA1
RAM 1" Track Ball™ with T-Bolt Attachment Part# RAP-B-354U-TRA1 The RAM Track Ball is made up of a B size 1" rubber ball molded to a high strength composite base, a rubber friction washer and a stainless steel T-bolt for sliding into virtually any track system. Simply insert or slide the Track Ball into your track and twist the ball clockwise to tighten in place. Twist counterclockwise to loosen or adjust the ball. T-Bolt Dimensions: .48" x .95"
Type: Stativ
297,-
237,60  ekskl. mva
Vårt lager på Furuset (PUP) Antall 10 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT RAM double ball link, B-size
Varenr.: RAM-B-230U
The RAM-B-230U, double ball joiner, consists of a 1" rubber ball on both ends that allow the connection of two 1" socket arms. When measured from ball center to ball center the arm length is 1.75". This mount is ideal if your mount arm is just too short.
Type: Stativ
406,-
324,80  ekskl. mva
Vårt lager på Furuset (PUP) Antall 3 Leverandørlager (1-3 arbeidsdager) Antall 1+
613,-
490,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 1 Leverandørlager (1-3 arbeidsdager) Antall 1+
378,-
302,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 99 Leverandørlager (1-3 arbeidsdager) Antall 1+
285,-
228,-  ekskl. mva
Vårt lager på Furuset (PUP) Antall 1 Leverandørlager (1-3 arbeidsdager) Antall 1+
380,-
304,-  ekskl. mva
Vårt lager på Furuset (PUP) Antall 277 Leverandørlager (1-3 arbeidsdager) Antall 1+
622,-
497,60  ekskl. mva
Vårt lager på Furuset (PUP) Antall 10 Leverandørlager (1-3 arbeidsdager) Antall 1+
546,-
436,80  ekskl. mva
Vårt lager på Furuset (PUP) Antall 19 Leverandørlager (1-3 arbeidsdager) Antall 1+
273,-
218,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 1 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT UNPKD RAM-U-BOLT ADAPTER FOR HANDLEBARS
Varenr.: RAP-319U
The RAP-319U is a composite adapter that is designed to narrow the rail width of RAM u-bolts to a minimum of 0.5".
Type: Stativ
78,-
62,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 1 Leverandørlager (1-3 arbeidsdager) Antall 1+
1 533,-
1 226,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 4 Leverandørlager (1-3 arbeidsdager) Antall 1+
1 166,-
932,80  ekskl. mva
Vårt lager på Furuset (PUP) Antall 3 Leverandørlager (1-3 arbeidsdager) Antall 1+
1 553,-
1 242,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 21 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT UNPKD. RAM GOPRO MOUNTING BASE 1" DIA BA
Varenr.: RAP-B-202U-GOP1
GoPro® cameras have reinvented how we capture some of the most exciting moments in our lives. Nearly two decades ago, RAM began reinventing mounting systems so that enthusiasts could use their cameras and video equipment like never before. RAM is proud to offer a sleek new adapter that will bring two revolutionary product lines together and open up a world of possibilities. While the GoPro® line of mounting accessories is nothing to scoff at, the diversity of the RAM product line is simply unmatched. Dream it. Live it. Capture it. RAM Mounting Systems and GoPro® make it possible to truly “Be a HERO™”. The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro® adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.
Type: Stativ
274,-
219,20  ekskl. mva
Vårt lager på Furuset (PUP) Antall 8 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT RAM 1" BALL W/ FEMALE SLIP PIPE SOCKET
Varenr.: RAP-B-294U
The RAP-B-294U consists of a 1" diameter ball with female PVC slip pipe socket. The socket can connect to any RAM PVC pipe and can be permanently fastened using electrical tape or PVC pipe cement. Intended for light duty use. Not intended for use in vehicle interiors or high temperature environments.
205,-
164,-  ekskl. mva
Vårt lager på Furuset (PUP) Antall 1 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT UNPKD RAM 2.5" X 1 5/16" BASE W/ BALL
Varenr.: RAP-B-238U
The RAP-B-238U consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles.
182,-
145,60  ekskl. mva
Vårt lager på Furuset (PUP) Antall 9 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT UNPKD. RAM 2.5" DIA.BASE WITH 1" BALL
Varenr.: RAP-B-202U
The RAP-B-202U contains a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
196,-
156,80  ekskl. mva
Vårt lager på Furuset (PUP) Antall 16 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT UNPKD RAM DOUBLE SOCKET ARM FOR 1" BALL
Varenr.: RAP-B-201U
The RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 3.69" Socket-To-Socket Length: 3"
Type: Ipad Stativ
299,-
239,20  ekskl. mva
Vårt lager på Furuset (PUP) Antall 9 Leverandørlager (1-3 arbeidsdager) Antall 1+
1 069,-
855,20  ekskl. mva
Vårt lager på Furuset (PUP) Antall 2 Leverandørlager (1-3 arbeidsdager) Antall 1+
1 059,-
847,20  ekskl. mva
Vårt lager på Furuset (PUP) Antall 38 Leverandørlager (1-3 arbeidsdager) Antall 1+
520,-
416,-  ekskl. mva
Vårt lager på Furuset (PUP) Antall 4 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT UNPKD RAM STD ARM W EXTENSION KNOB RET
Varenr.: RAM-B-201-ALA1-KRU
The RAM-B-201-ALA1-KRU, STANDARD length double socket arm with retention knob, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. The knob extension allows for easy adjustment of the mount and prevents over loosening of the knob. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 3.69" Socket-To-Socket Length: 3"
594,-
475,20  ekskl. mva
Vårt lager på Furuset (PUP) Antall 37 Leverandørlager (1-3 arbeidsdager) Antall 1+
3 129,-
2 503,20  ekskl. mva
Vårt lager på Furuset (PUP) Antall 4 Leverandørlager (1-3 arbeidsdager) Antall 1+
1 273,-
1 018,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 1 Leverandørlager (1-3 arbeidsdager) Antall 1+
606,-
484,80  ekskl. mva
Vårt lager på Furuset (PUP) Antall 15 Leverandørlager (1-3 arbeidsdager) Antall 1+
248,-
198,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 18 Leverandørlager (1-3 arbeidsdager) Antall 1+
262,-
209,60  ekskl. mva
Vårt lager på Furuset (PUP) Antall 1 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT RAM L- Rail base, B-size
Varenr.: RAM-B-408-112-15U
582,-
465,60  ekskl. mva
Vårt lager på Furuset (PUP) Antall 3 Leverandørlager (1-3 arbeidsdager) Antall 1+
696,-
556,80  ekskl. mva
Vårt lager på Furuset (PUP) Antall 1 Leverandørlager (1-3 arbeidsdager) Antall 1+
379,-
303,20  ekskl. mva
Vårt lager på Furuset (PUP) Antall 13 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT Rail base, 2 x U-bolt, C-size
Varenr.: RAM-235U
The RAM-235U consists of a double u-bolt base with 1.5" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 0.75" to 1.25" in diameter. U-Bolt Dimensions: 0.75" to 1.25" in diameter
671,-
536,80  ekskl. mva
Vårt lager på Furuset (PUP) Antall 12 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT RAM base, 2" x 2.5", C-size
Varenr.: RAM-202U-225
The RAM-202U-225 contains a 1.5" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1.5" x 2" center to center. Overall plate dimensions are 2" x 2.5".
380,-
304,-  ekskl. mva
Vårt lager på Furuset (PUP) Antall 13 Leverandørlager (1-3 arbeidsdager) Antall 1+
816,-
652,80  ekskl. mva
Vårt lager på Furuset (PUP) Antall 1 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT RAM M- Rail base, B-size
Varenr.: RAM-B-408-75-1U
The RAM® Torque™ handlebar and rail mounting base has a 1” rubber ball and accommodates bars ¾” to 1” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Mounting Base Dimensions: Accommodates rails 0.75" to 1" in diameter.
558,-
446,40  ekskl. mva
Vårt lager på Furuset (PUP) Antall 2 Leverandørlager (1-3 arbeidsdager) Antall 1+
969,-
775,20  ekskl. mva
Vårt lager på Furuset (PUP) Antall 2 Leverandørlager (1-3 arbeidsdager) Antall 1+
RAM MOUNT RAM SNAP LINK ARM RAM TO GARMIN LONG
Varenr.: RAP-SBA-RGLU
The RAM-to-Garmin double ball LONG arm will attach to the EZ-Strap™ base, making it a complete mounting system for Garmin GPS devices that contain a factory mounting bracket that accommodates the Garmin "G-Ball". The overall length of the LONG arm adapter is 3".
116,-
92,80  ekskl. mva
Vårt lager på Furuset (PUP) Antall 1 Leverandørlager (1-3 arbeidsdager) Antall 1+
994,-
795,20  ekskl. mva
Vårt lager på Furuset (PUP) Antall 4 Leverandørlager (1-3 arbeidsdager) Antall 1+
Viser 1-60 av 5512 produkter
...