RAMmount

HARDWARE PACK METAL BASE 4 QTY HARDWARE

POWER CORD RETAINING HARDWARE PACK

UNPKD 4 QTY. SHOULDER WASHERS

RAM 1" NPT END CAP

RAM HARDWARE FOR XM RADIO

The RAP-319U is a composite adapter that is designed to narrow the rail width of RAM u-bolts to a minimum of 0.5".

HARDWARE PACK FOR METAL BASES

RAM 1.11 OD X 6" LONG BLACK PVC PIPE

RAM 1.11 OD X 2" LONG BLACK PVC PIPE

RAM 1.11 OD X 4" LONG BLACK PVC PIPE

The RAM® X-Grip® is one of the best-selling, most trusted device mounts on the market. The RAM® X-Grip® provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environments, you can ensure added piece-of-mind with the RAM® X-Grip® Tether. The RAM® X-Grip® Tether is recommended for out-of-cockpit applications where excessive wind and G-force could cause movement of the device within the holder. It’s also great if you just want a little added stability and vibration control when capturing video from the mount. The Tether is made of high-strength elastomeric material and fits around the RAM® X-Grip® holder for easy device insertion.

POWER BOX POWER TIP 5.5MM OD X 2.5MM ID

The coupler is to combine 2 RAP-B-200-1U and/or RAP-200-1U to form a double socket arm with the capability to rotate 360° in the center of the arm. This will also give the ability to have a B size 1” ball socket on one side and a C size 1.5” ball socket on the other. This is intended for light duty uses.

UNPKD RAM NON SLIP BEARING KIT

The RAP-S-KEY3-4U replacement key knob is compatible with the RAP-S-KNOB3-4, RAP-S-KNOB3-4U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 4 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEY3-5U replacement key knob is compatible with the RAP-S-KNOB3-5, RAP-S-KNOB3-5U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 5 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEY3-6U replacement key knob is compatible with the RAP-S-KNOB3-6, RAP-S-KNOB3-6U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 6 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEY3-7U replacement key knob is compatible with the RAP-S-KNOB3-7, RAP-S-KNOB3-7U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 7 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEYN5-4U replacement key knob is compatible with 2.25"/3.38" diameter D/E size arms and mounts that contain the RAM® Pin-Lock™ security nut. Verify the correct replacement key knob by matching it's node number pattern with the node number pattern found on the security nut.

The Center Loader allows for the connection of two Extruded Aluminum Tough-Track™ systems in a straight line and provides a loading point to insert track bases. Hardware not included.

The RAM-to-Garmin double ball adapter arm will attach to the EZ-Strap™ base, making it a complete mounting system for Garmin GPS devices that contain a factory mounting bracket that accommodates the Garmin "G-Ball". The overall length of the SHORT arm adapter is 1.43".

The High Strength Plastic Universal Plate has a 1.0" diameter Round Male Button on an Octagon Neck connected at right angles to a 1 1/4" x 2 1/2" Diamond Plate. The plate has two holes 1.912" from center to center, positioned at either tip of the diamond plate. NOTE: This base plate will attach to any of the RAM plastic HOL holders and the industry standard AMPS hole pattern.

The RAP-SBA-RRU consists of a 1.43" overall length arm with double RAM-to-RAM balls at each end. This arm serves as middle attachment point between the RAM-HOL-UN7U and RAP-SB-187BU.

Qty. 2 Round Steel Adhesive Plates for RAM Power Plate™ Series The RAP-300-1RU consists of a round 18mm diameter x 1mm thick metal plate with adhesive back.

RAM STACK-N-STOW™ Bait Board Side Wedge-Lock

The RAM® X-Grip® is one of the best-selling, most trusted device mounts on the market. The RAM® X-Grip® provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environments, you can ensure added piece-of-mind with the RAM® X-Grip® Tether. The RAM® X-Grip® Tether is recommended for out-of-cockpit applications where excessive wind and G-force could cause movement of the device within the holder. It’s also great if you just want a little added stability and vibration control when capturing video from the mount. The Tether is made of high-strength elastomeric material and fits around the RAM® X-Grip® holder for easy device insertion.

RAM Female Tele-Pole™ Rubber Cap

Top Cap Replacement for RAM-TUBE™ Fishing Rod Holder

The RAM-to-Garmin double ball LONG arm will attach to the EZ-Strap™ base, making it a complete mounting system for Garmin GPS devices that contain a factory mounting bracket that accommodates the Garmin "G-Ball". The overall length of the LONG arm adapter is 3".

The RAP-S-KEY5-4U replacement key knob is compatible with the RAP-S-KNOB5-4, RAP-S-KNOB5-4U and RAP-S-KNOB5/RAP-S-KNOB5U mixed combination security knobs that contain the 4 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEY5-7U replacement key knob is compatible with the RAP-S-KNOB5-7, RAP-S-KNOB5-7U and RAP-S-KNOB5/RAP-S-KNOB5U mixed combination security knobs that contain the 7 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEYN5-5U replacement key knob is compatible with 2.25"/3.38" diameter D/E size arms and mounts that contain the RAM® Pin-Lock™ security nut. Verify the correct replacement key knob by matching it's node number pattern with the node number pattern found on the security nut.

The RAP-S-KEYN5-6U replacement key knob is compatible with 2.25"/3.38" diameter D/E size arms and mounts that contain the RAM® Pin-Lock™ security nut. Verify the correct replacement key knob by matching it's node number pattern with the node number pattern found on the security nut.

The RAP-S-KEYN5-7U replacement key knob is compatible with 2.25"/3.38" diameter D/E size arms and mounts that contain the RAM® Pin-Lock™ security nut. Verify the correct replacement key knob by matching it's node number pattern with the node number pattern found on the security nut.

The RAP-SB-238FU consists of 2.43" x 1.31" composite diamond base with female socket. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles. The female socket will attach to RAM snap link ball mounts.

The RAP-SBA-RRLU consists of a 3" overall length arm with double RAM-to-RAM balls at each end. This arm serves as middle attachment point between the RAM-HOL-UN7U and RAP-SB-187BU.

RAM OCTAGON BUTTON W NO PSA & HOLE UNPKD

RAM SNAP LINK MALE-FEMALE UNPKD.

The RAM-MARI-RIVET-4U consists of (4 qty) aluminum 1/8" pop rivets for blind hole mounting applications.

RAM 1.11 OD X 8" LONG BLACK PVC PIPE

The RAP-PPA-MRM75 consists of a male to male slip pipe socket coupler. The socket can connect to any RAM PVC pipe and can be permanently fastened using electrical tape or PVC pipe cement. Intended for light duty use. Not intended for use in vehicle interiors or high temperature environments.

RAM Aqua Box® Pro Mounting Clip (Hardware Not Included) The RAM-HOL-AQ7C-NHU mounting clip contains the universal AMPs hole pattern, and it is compatible with all AQUA BOX® Pro cases.

GDS® Genuine USB 2.0 90-Degree Cable - 1.2 Meters Long

RAM Snap-Link Double Socket Arm for 0.75" Balls

Laptop Mount Accessory - RAM Universal Laptop Tough-Tray™ Flat Arm Part# RAM-234K1U The RAM RAM-234K1U, flat side keeper, attaches to the RAM-234-3 RAM Tough-Tray™. The side keeper allows for your laptop to close completely while in the RAM Tough-Tray™. *This is for 1 single Flat Arm.

RAM HARDWARE FOR GARMIN 7200

RAM EZ-ON/OFF™ Quick Release Diamond Adapter Base The RAP-274-1BU converts all 1" diamond base ball mounts into a quick release mount. Attach the RAP-274-1BU to the diamond pattern found on all 1" diamond base ball mounts, then transfer your cradle from the EZ-ON/OFF™ Bicycle Mount to your second mount.

The RAP-S-KEY5-5U replacement key knob is compatible with the RAP-S-KNOB5-5, RAP-S-KNOB5-5U and RAP-S-KNOB5/RAP-S-KNOB5U mixed combination security knobs that contain the 5 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEY5-6U replacement key knob is compatible with the RAP-S-KNOB5-6, RAP-S-KNOB5-6U and RAP-S-KNOB5/RAP-S-KNOB5U mixed combination security knobs that contain the 6 node security pattern. Please verify the node security pattern on your security knob before purchase.

The High Strength Plastic Universal Plate has a 1.0"diameter Round Male Button on an Octagon Neck, connected at right angles to a 2.5" diameter Round Plate. The plate has four holes that match the universal AMPS hole pattern.

The RAP-SB-238U, composite diamond base, contains a 0.75" high strength composite ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base.

RAM FEMALE PIPE SCKT W/OCTAGON BTTN UNPK

UNPKD. RAM METAL PEN W/ LOGO

The 90 Degree Connector allows for the connection of two Extruded Aluminum Tough-Track™ systems and provides loading points to insert track bases. While track bases can be moved laterally across an attached Tough-Track, they cannot be moved around the connector and must be removed and re-inserted on the adjacent side. Hardware not included.

RAM SNAP LINK FEMALE-FEMALE UNPKD.

The RAM Leash Cup is the perfect complement to the RAM Leash Plug Adapter. If you are manufacturing surfboards, stand-up paddle boards or similar watercraft, consider integration of the RAM system to offer a versatile and robust accessory mounting platform. Retrofit an existing watercraft by drilling and glassing in a leash cup.

RAM PIPE ADA FEMALE RAM FEMALE 3/4" PIPE

RAM ZE1 HARDWARE

The RAM® X-Grip® is one of the best-selling, most trusted device mounts on the market. The RAM® X-Grip® provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environments, you can ensure added piece-of-mind with the RAM® X-Grip® Tether. The RAM® X-Grip® Tether is recommended for out-of-cockpit applications where excessive wind and G-force could cause movement of the device within the holder. It’s also great if you just want a little added stability and vibration control when capturing video from the mount. The Tether is made of high-strength elastomeric material and fits around the RAM® X-Grip® holder for easy device insertion.

Qty. 2 Rectangle Steel Adhesive Plates for RAM Power Plate™ Series

The RAP-PPA-FRM75 consists of 2 female slip pipe socket for 3/4" to 1/2" reducer. The socket can connect to any RAM PVC pipe and can be permanently fastened using electrical tape or PVC pipe cement. Intended for light duty use. Not intended for use in vehicle interiors or high temperature environments.

The Extruded Composite Tough-Track™ is your cost effective track mounting solution. This version of the Tough-Track does not use end caps and features a tapered end allowing for stress-free insertion and removal of track accessories. The hardware sits in a sunken channel so the T-Bolt won’t get stuck when sliding across the track. With pre-drilled holes for #8 screws, installing the Tough-Track is easy. Hardware not included. Dimensions: Overall length: 3" Overall width: .91" Track thickness: .52"

BASE TO BASE HARDWARE PACK

UNPKGD RAM UNIVERSAL CLAMP ARMS

The Extruded Composite Tough-Track™ is your cost effective track mounting solution. This version of the Tough-Track does not use end caps and features a tapered end allowing for stress-free insertion and removal of track accessories. The hardware sits in a sunken channel so the T-Bolt won’t get stuck when sliding across the track. With pre-drilled holes for #8 screws, installing the Tough-Track is easy. Hardware not included. Dimensions: Overall length: 4" Overall width: .91" Track thickness: .52"

The rust proof metal u-bolt accommodates rails in diameter from 0.5" to 1" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".

The RAM-HOL-AQ3LU is a replacement flex lens for the RAM-HOL-AQ3U.

Koozie Insert for RAM® Level Cup™

GDS® Genuine USB 2.0 Straight Cable - 1.2 Meters Long

RAM 1.11 OD X 12" LONG BLACK PVC PIPE

If your Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-n-Motion™ kit.

1/4-20 X 1 1/4" ID X 2 1/2" STST U-BOLT

The Extruded Composite Tough-Track™ is your cost effective track mounting solution. This version of the Tough-Track does not use end caps and features a tapered end allowing for stress-free insertion and removal of track accessories. The hardware sits in a sunken channel so the T-Bolt won’t get stuck when sliding across the track. With pre-drilled holes for #8 screws, installing the Tough-Track is easy. Hardware not included. Dimensions: Overall length: 6" Overall width: .91" Track thickness: .52"

Zinc Coated U-Bolt Hardware Pack, accommodates Rails 0.5" to 1.25" The metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".

2" x 7.5" Rubber Adhesive Pad for RAM-233U

KNOB W/ 3/8"-16 BRASS HOLE

The RAP-UN-CAP-4U consists of (4 qty) post caps that are an accessory for all RAM® X-Grip® cradles and mounts. Optional super glue is included to offer extra security of the rubber caps on your RAM® X-Grip®.

The RAP-B-326MU, Ezy-Mount™ quick release adapter, consists of a 1" ball and male base that will connect to the RAP-B-326FU.

RAM 2.5" Composite Round Base with the AMPs Hole Pattern & 0.75" Snap-Link Ball

RAM DIAMOND BASE W/45 FEM SNAP LINK UNPK

The Extruded Composite Tough-Track™ is your cost effective track mounting solution. This version of the Tough-Track does not use end caps and features a tapered end allowing for stress-free insertion and removal of track accessories. The hardware sits in a sunken channel so the T-Bolt won’t get stuck when sliding across the track. With pre-drilled holes for #8 screws, installing the Tough-Track is easy. Hardware not included. Dimensions: Overall length: 8" Overall width: .91" Track thickness: .52"

RAM Composite 2" x 1.7" Base with 1" Ball that Contains the Universal AMPs Hole Pattern for the Garmin zumo, TomTom Rider & Urban Rider The RAP-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, making the universal 1.5 x 1.188 (hole spacing) AMPS hole pattern.

RAM Snap Link Mount with Short Arm & 2/Diamond Bases

With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any flat surface and is designed for use with #10 screws for easy installation – hardware not included. The Tough-Track works with a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones, and tablets. Dimensions: Overall length: 3.75" Overall width: 1.75" Track thickness: .35" Inside track length: 2.43"

The RAM-202PSAU, double sided adhesive disk, is designed to connect to any 2.5" round base including the RAM-B-202U, RAM-202U or RAP-B-202U

RAM Double Adhesive Pad for Mounting The RAM-347PSAU consists of a 2" x 1.68" double sided adhesive sheet of rubber for mounting.

Designed to hold an XM or GPS antenna magnetically, the RAM-348U plate will attach between any RAM base with the AMPS hole pattern and most standard XM units. Mount your satellite radio receiver and antenna all on a single platform for both ease of installation and use. Whether you’ve run out of mounting space or simply have few good mounting surfaces, the RAM-348U antenna adapter plate opens up many possibilities.

RAM HARDWARE FOR GARMIN 195,295, SPIII

RAM EZ-ON/OFF™ Rubber Adapter and Ties