RAMmount

POWER CORD RETAINING HARDWARE PACK

UNPKD 4 QTY. SHOULDER WASHERS

RAM 1" NPT END CAP

RAM HARDWARE FOR XM RADIO

The RAP-319U is a composite adapter that is designed to narrow the rail width of RAM u-bolts to a minimum of 0.5".

HARDWARE PACK FOR METAL BASES

RAM 1.11 OD X 2" LONG BLACK PVC PIPE

RAM 1.11 OD X 4" LONG BLACK PVC PIPE

RAM 1.11 OD X 6" LONG BLACK PVC PIPE

The RAM® X-Grip® is one of the best-selling, most trusted device mounts on the market. The RAM® X-Grip® provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environments, you can ensure added piece-of-mind with the RAM® X-Grip® Tether. The RAM® X-Grip® Tether is recommended for out-of-cockpit applications where excessive wind and G-force could cause movement of the device within the holder. It’s also great if you just want a little added stability and vibration control when capturing video from the mount. The Tether is made of high-strength elastomeric material and fits around the RAM® X-Grip® holder for easy device insertion.

POWER BOX POWER TIP 5.5MM OD X 2.5MM ID

The coupler is to combine 2 RAP-B-200-1U and/or RAP-200-1U to form a double socket arm with the capability to rotate 360° in the center of the arm. This will also give the ability to have a B size 1” ball socket on one side and a C size 1.5” ball socket on the other. This is intended for light duty uses.

UNPKD RAM NON SLIP BEARING KIT

The RAP-S-KEY3-4U replacement key knob is compatible with the RAP-S-KNOB3-4, RAP-S-KNOB3-4U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 4 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEY3-5U replacement key knob is compatible with the RAP-S-KNOB3-5, RAP-S-KNOB3-5U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 5 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEY3-6U replacement key knob is compatible with the RAP-S-KNOB3-6, RAP-S-KNOB3-6U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 6 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEY3-7U replacement key knob is compatible with the RAP-S-KNOB3-7, RAP-S-KNOB3-7U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 7 node security pattern. Please verify the node security pattern on your security knob before purchase.

HARDWARE PACK METAL BASE 4 QTY HARDWARE

The RAM-to-Garmin double ball adapter arm will attach to the EZ-Strap™ base, making it a complete mounting system for Garmin GPS devices that contain a factory mounting bracket that accommodates the Garmin "G-Ball". The overall length of the SHORT arm adapter is 1.43".

The RAP-S-KEYN5-4U replacement key knob is compatible with 2.25"/3.38" diameter D/E size arms and mounts that contain the RAM® Pin-Lock™ security nut. Verify the correct replacement key knob by matching it's node number pattern with the node number pattern found on the security nut.

The Center Loader allows for the connection of two Extruded Aluminum Tough-Track™ systems in a straight line and provides a loading point to insert track bases. Hardware not included.

The High Strength Plastic Universal Plate has a 1.0" diameter Round Male Button on an Octagon Neck connected at right angles to a 1 1/4" x 2 1/2" Diamond Plate. The plate has two holes 1.912" from center to center, positioned at either tip of the diamond plate. NOTE: This base plate will attach to any of the RAM plastic HOL holders and the industry standard AMPS hole pattern.

The RAP-SBA-RRU consists of a 1.43" overall length arm with double RAM-to-RAM balls at each end. This arm serves as middle attachment point between the RAM-HOL-UN7U and RAP-SB-187BU.

Qty. 2 Round Steel Adhesive Plates for RAM Power Plate™ Series The RAP-300-1RU consists of a round 18mm diameter x 1mm thick metal plate with adhesive back.

RAM STACK-N-STOW™ Bait Board Side Wedge-Lock

The RAM® X-Grip® is one of the best-selling, most trusted device mounts on the market. The RAM® X-Grip® provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environments, you can ensure added piece-of-mind with the RAM® X-Grip® Tether. The RAM® X-Grip® Tether is recommended for out-of-cockpit applications where excessive wind and G-force could cause movement of the device within the holder. It’s also great if you just want a little added stability and vibration control when capturing video from the mount. The Tether is made of high-strength elastomeric material and fits around the RAM® X-Grip® holder for easy device insertion.

RAM Female Tele-Pole™ Rubber Cap

Top Cap Replacement for RAM-TUBE™ Fishing Rod Holder

The RAM-to-Garmin double ball LONG arm will attach to the EZ-Strap™ base, making it a complete mounting system for Garmin GPS devices that contain a factory mounting bracket that accommodates the Garmin "G-Ball". The overall length of the LONG arm adapter is 3".

The RAP-S-KEYN5-5U replacement key knob is compatible with 2.25"/3.38" diameter D/E size arms and mounts that contain the RAM® Pin-Lock™ security nut. Verify the correct replacement key knob by matching it's node number pattern with the node number pattern found on the security nut.

The RAP-S-KEYN5-6U replacement key knob is compatible with 2.25"/3.38" diameter D/E size arms and mounts that contain the RAM® Pin-Lock™ security nut. Verify the correct replacement key knob by matching it's node number pattern with the node number pattern found on the security nut.

The RAP-S-KEYN5-7U replacement key knob is compatible with 2.25"/3.38" diameter D/E size arms and mounts that contain the RAM® Pin-Lock™ security nut. Verify the correct replacement key knob by matching it's node number pattern with the node number pattern found on the security nut.

The RAP-SB-238FU consists of 2.43" x 1.31" composite diamond base with female socket. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles. The female socket will attach to RAM snap link ball mounts.

The RAP-SBA-RRLU consists of a 3" overall length arm with double RAM-to-RAM balls at each end. This arm serves as middle attachment point between the RAM-HOL-UN7U and RAP-SB-187BU.

RAM SNAP LINK MALE-FEMALE UNPKD.

The RAP-S-KEY5-4U replacement key knob is compatible with the RAP-S-KNOB5-4, RAP-S-KNOB5-4U and RAP-S-KNOB5/RAP-S-KNOB5U mixed combination security knobs that contain the 4 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEY5-5U replacement key knob is compatible with the RAP-S-KNOB5-5, RAP-S-KNOB5-5U and RAP-S-KNOB5/RAP-S-KNOB5U mixed combination security knobs that contain the 5 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEY5-6U replacement key knob is compatible with the RAP-S-KNOB5-6, RAP-S-KNOB5-6U and RAP-S-KNOB5/RAP-S-KNOB5U mixed combination security knobs that contain the 6 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEY5-7U replacement key knob is compatible with the RAP-S-KNOB5-7, RAP-S-KNOB5-7U and RAP-S-KNOB5/RAP-S-KNOB5U mixed combination security knobs that contain the 7 node security pattern. Please verify the node security pattern on your security knob before purchase.

RAM OCTAGON BUTTON W NO PSA & HOLE UNPKD

RAM 1.11 OD X 8" LONG BLACK PVC PIPE

The RAM-MARI-RIVET-4U consists of (4 qty) aluminum 1/8" pop rivets for blind hole mounting applications.

RAM Aqua Box® Pro Mounting Clip (Hardware Not Included) The RAM-HOL-AQ7C-NHU mounting clip contains the universal AMPs hole pattern, and it is compatible with all AQUA BOX® Pro cases.

The RAP-PPA-MRM75 consists of a male to male slip pipe socket coupler. The socket can connect to any RAM PVC pipe and can be permanently fastened using electrical tape or PVC pipe cement. Intended for light duty use. Not intended for use in vehicle interiors or high temperature environments.

GDS® Genuine USB 2.0 90-Degree Cable - 1.2 Meters Long

Laptop Mount Accessory - RAM Universal Laptop Tough-Tray™ Flat Arm Part# RAM-234K1U The RAM RAM-234K1U, flat side keeper, attaches to the RAM-234-3 RAM Tough-Tray™. The side keeper allows for your laptop to close completely while in the RAM Tough-Tray™. *This is for 1 single Flat Arm.

RAM Snap-Link Double Socket Arm for 0.75" Balls

RAM HARDWARE FOR GARMIN 7200

RAM EZ-ON/OFF™ Quick Release Diamond Adapter Base The RAP-274-1BU converts all 1" diamond base ball mounts into a quick release mount. Attach the RAP-274-1BU to the diamond pattern found on all 1" diamond base ball mounts, then transfer your cradle from the EZ-ON/OFF™ Bicycle Mount to your second mount.

RAM 3" ADHESIVE PAD ONLY

The High Strength Plastic Universal Plate has a 1.0"diameter Round Male Button on an Octagon Neck, connected at right angles to a 2.5" diameter Round Plate. The plate has four holes that match the universal AMPS hole pattern.

RAM FEMALE PIPE SCKT W/OCTAGON BTTN UNPK

UNPKD. RAM METAL PEN W/ LOGO

The 90 Degree Connector allows for the connection of two Extruded Aluminum Tough-Track™ systems and provides loading points to insert track bases. While track bases can be moved laterally across an attached Tough-Track, they cannot be moved around the connector and must be removed and re-inserted on the adjacent side. Hardware not included.

The RAP-SB-238U, composite diamond base, contains a 0.75" high strength composite ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base.

RAM SNAP LINK FEMALE-FEMALE UNPKD.