RAM MOUNT RAM MOTORCYCLE BASE W HOLE M8 SCREW
|
RAM MOUNT RAM MOTORCYCLE BASE W HOLE M8 SCREW
Have an M8 by 25, 30, or 35mm handlebar bolt? The RAM-B-367U will replace that bolt with a standard ball-mount to put just about anything there!
Included with Purchase:
(1 QTY) 1" Rubber ball
(1 QTY) M8 x 55 bolt (1.25 thread pitch)
(1 QTY) M8 x 60 bolt (1.25 thread pitch)
(1 QTY) M8 x 65 bolt (1.25 thread pitch)
Compatible Motorcycles: Any motorcycle which employs an 8mm bolt or smaller on its structure. A smaller bolt can be used, though the load capacity decreases with the bolt size.
300,-
240,- ekskl. mva
Vårt lager på Kalbakken (PUP)
Antall
3
Leverandørlager (1-3 arbeidsdager)
Antall
1+
Frakt: 70,- Sjekk din fraktpris
|
Beskrivelse
Spesifikasjoner
Relaterte produkter
Have an M8 by 25, 30, or 35mm handlebar bolt? The RAM-B-367U will replace that bolt with a standard ball-mount to put just about anything there! This part is compatible with any motorcycle which employs an 8mm bolt or smaller on its structure. A smaller bolt can be used, though the load capacity decreases with the bolt size.
Tekniske detaljer |
---|
Festeballens diameter | 2,54 cm |
Produktfarge | Svart |
Diskmateriale | Aluminium, Gummi |
Vekt og dimensjoner |
---|
Vekt | 113,39 g |
Mobil, Tele & Tilbehør / RAMmount / B-serie
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Vårt lager på Kalbakken (PUP)
Antall
80
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Mobil, Tele & Tilbehør / RAMmount / Div
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Mobil, Tele & Tilbehør / Mobil Div tilbehør / Holdere
RAM MOUNT RAM MOUNT W/ 272 BASE X-GRIP SHORT
The RAM-B-272-A-UN7 consists of an angled base with 9mm hole, SHORT double socket arm and universal spring loaded RAM® X-Grip® cradle for cell phones. The angled base is often used on motorcycles, attaching to the mirror frame, the main brand of bike for this part is BMW. The included RAM® X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded RAM® X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM® X-Grip® is the cell phone cradle evolved.
The RAM® X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Cradle Dimensions
Minimu
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Mobil, Tele & Tilbehør / RAMmount / Div
RAM MOUNT RAM RAIL MNT BASE W/SWIVEL FEATURE UNPKD
The RAM high strength composite rail mount consists of a locking tooth system with a standard diamond plate end. The mount will accommodate rails up to 1" in diameter. The hole pattern found on the diamond base adapter will connect to most RAM cradles.
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Mobil, Tele & Tilbehør / RAMmount / B-serie
RAM MOUNT S- RAM arm, 2.38", B-size
The RAM-B-201U-A, Short length double socket arm, has a socket at both ends that accommodates B Size 1" balls. RAM's socket technology allows for almost infinite adjustment to achieve the perfect viewing angle.
Dimensions:
Overall Length: 2.38"
Socket-To-Socket Length: 1.75"
NOTE
This product does not include the pin spring
Type: Stativ
-
Brand Compatibility: Alle merker
Vårt lager på Kalbakken (PUP)
Antall
30
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Mobil, Tele & Tilbehør / RAMmount / Div
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Foto & Fritid / Kamera / tilbehør / estrem-sport camera tilbehør
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
3+
%@>
Mobil, Tele & Tilbehør / RAMmount / B-serie
Vårt lager på Kalbakken (PUP)
Antall
9
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
RAM MOUNT UNPKD RAM STD ARM W EXTENSION KNOB RET
Varenr.:
RAM-B-201-ALA1-KRU
The RAM-B-201-ALA1-KRU, STANDARD length double socket arm with retention knob, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. The knob extension allows for easy adjustment of the mount and prevents over loosening of the knob. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 3.69"
Socket-To-Socket Length: 3"
Vårt lager på Kalbakken (PUP)
Antall
27
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Mobil, Tele & Tilbehør / RAMmount / Div
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et
generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er
forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som
gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er
uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.