RAM MOUNT M- RAM suction kit, B-size
|
RAM MOUNT M- RAM suction kit, B-size
915,-
732,- ekskl. mva
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
652+
|
Beskrivelse
Spesifikasjoner
Relaterte produkter
The RAM-B-166U consists of a 3.3" diameter suction cup twist lock base, STANDARD length double socket arm and diamond base adapter. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles.
Tekniske detaljer |
---|
Festeballens diameter | 2,54 cm |
Produktfarge | Svart |
Diskmateriale | Aluminium |
Vekt og dimensjoner |
---|
Vekt | 272,1 g |
Høyde | 171,4 mm |
Mobil, Tele & Tilbehør / RAMmount / B-serie
Vårt lager på Kalbakken (PUP)
Antall
81
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Vårt lager på Kalbakken (PUP)
Antall
1
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
RAM MOUNT RAM base, suction, B-size
The RAM-B-224-1U consists of a 3.3" diameter suction cup twist lock base that is connected to the (RAM-B-238U), diamond base with B size 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.
Type: Stativ
-
Brand Compatibility: Alle merker
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
RAM MOUNT RAM diamond adapter, B-size
The RAM-B-238U consists of a B size 1" diameter rubber ball on a 2.43" x 1.31" diamond plate. The plate has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM mounts and third party cradles.
Type: Stativ
-
Brand Compatibility: Alle merker
Vårt lager på Kalbakken (PUP)
Antall
23
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Mobil, Tele & Tilbehør / Mobil Div tilbehør / Holdere
Vårt lager på Kalbakken (PUP)
Antall
1
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Mobil, Tele & Tilbehør / RAMmount / B-serie
RAM MOUNT RAM Rail base, U-bolt, B-size
The RAM-B-231ZU consists of a B size 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
U-Bolt Dimensions:
Accommodates rails from 0.5" to 1.25" in diameter.
Type: Stativ
-
Brand Compatibility: Alle merker
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
RAM MOUNT UNPKD RAM CYCLE HANDLEBAR BASE W/ 1 BALL
The RAM-B-309-1U connects to your handlebar clutch/brake clamp, left or right side, and holds one 1" diameter mounting ball. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1U base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Mobil, Tele & Tilbehør / Navigasjon / Navigatormonteringer
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Mobil, Tele & Tilbehør / Mobil Div tilbehør / Holdere
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Data & Tilbehør / Datamaskiner / håndholdte mobile datamaskiner / Tilbehør Til Håndholdte Enheter
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Mobil, Tele & Tilbehør / Mobil Div tilbehør / Holdere
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Mobil, Tele & Tilbehør / Navigasjon / Navigatormonteringer
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Mobil, Tele & Tilbehør / RAMmount / Div
Vårt lager på Kalbakken (PUP)
Antall
1
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Mobil, Tele & Tilbehør / Mobil Div tilbehør / Holdere
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1+
%@>
Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et
generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er
forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som
gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er
uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.