PLANET Konverter 10/100TX - 100FX SC MM Multimode 100Mbit SC
|
PLANET Konverter 10/100TX - 100FX SC MM Multimode 100Mbit SC
-
Produkt
Mediekonverterere
1 099,-
879,20 ekskl. mva
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Ikke på lager
|
Beskrivelse
Spesifikasjoner
FT-80X
Fast Ethernet Bridge Media Converters
The PLANET FT-80X is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports selectable for half-duplex and full-duplex operations and supports a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2 km and single-mode models that support distances up to 15/35/50 km are available.
The FT-80x series are with LFP (Link Fault Pass Through function) (LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net. The DIP Switch provides disable or enable the LFP function.
LLCF (Link Loss Carry Forward) means when a device connected to the converter and the TP line loss the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loss the link, the converter's fiber will disconnect the link of transmit. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net.
Key Features
|
Comply with IEEE802.3, IEEE802.3u 10/100Base-TX, 100Base-FX Standard
|
|
Connectors: One RJ-45 (Auto-MDI/MDI-X) Twisted Pair, EIA568
|
|
One Fiber-optic, 1310nm wavelength, connector-type and distance vary with model.
FT-806A20: Tx-1310nm, Rx-1550nm
FT-806B20: Tx-1550nm, Rx-1310nm
|
|
Data Transfer Rate:
TP: 10/100Mbps
FX: 100Mbps
|
|
Duplex mode support:
Full or half-duplex mode by Auto- Negotiation (TP)
Full or half-duplex mode by DIP-switch (FX)
|
|
LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
|
|
DIP-switch: 2 DIP-switches
Rear DIP-switch: FX duplex mode selection
Side DIP-switch: LFP (Link Fault Pass-through) mode selection |
Product |
Model |
FT-80x |
Protocol |
IEEE 802.3u, 100Base-FX, 100Base-TX |
Dimensions |
70 x 97 x 26 mm (W x D x H) |
Weight |
0.2kg |
Power |
5V DC, 2A, max. |
Connectors and Cables |
Twisted Pair / STP |
RJ45, Category 5 (EIA/TIA 568) |
Fiber-optic |
Vary on model; X=1,2,3,4,5,6 1:ST 2:SC 3:MT-RJ 4:VF-45 6 Single SC; WDM |
Multi-mode cable |
50/125, 62.5/125 µm |
Single-Mode (SM) cable |
9/125 µm |
Supported Distances and function |
Twisted Pair STP |
100 m / 328 ft. |
Multi-mode Fiber Optic |
412 m / 1,350 ft. (Half-Duplex) 2 km / 1.2 mile. (Full-Duplex) |
Single-Mode (SM) |
412 m / 1,350 ft. (Half-Duplex) 15 km / 9 mile. (Full-Duplex) 35km / 21 mile. (Full-Duplex) 50km / 31 mile. (Full-Duplex) |
Port Mode |
TP: Half and Full Duplex, auto-negotiation FX: Half and Full Duplex via DIP switch |
Environmental |
Temperature |
0 to 50 degrees C |
Humidity |
5-90% (non-condensing) |
FT-801 |
100Base-FX to 10/100Base-TX (ST, MM) Bridge Media Converter |
FT-802 |
100Base-FX to 10/100Base-TX (SC, MM) Bridge Media Converter |
FT-802S15 |
100Base-FX to 10/100Base-TX (SC, SM, 15Km) Bridge Media Converter |
FT-802S35 |
100Base-FX to 10/100Base-TX (SC, SM, 35Km) Bridge Media Converter |
FT-802S50 |
100Base-FX to 10/100Base-TX (SC, SM, 50Km) Bridge Media Converter |
FT-803 |
100Base-FX to 10/100Base-TX (MT-RJ, MM) Bridge Media Converter |
FT-804 |
100Base-FX to 10/100Base-TX (VF-45, MM) Bridge Media Converter |
FT-806A20 * |
100Base-FX to 10/100Base-TX (SC, SM) Bridge Media Converter (TX: 1310) |
FT-806B20 * |
100Base-FX to 10/100Base-TX (SC, SM) Bridge Media Converter (TX: 1550) |
*Remark |
FT-806A20/806B20 should runs in pair. It means you must connect FT-806A20 in one end another FT-806B20 in other end. |
Nettverksbygging |
---|
Maksimal dataoverføringshastighet | 100 Mbit/s |
Omformer-inngangsgrensesnitt | 100BASE-FX,100Base-TX,10Base-T |
Omformer-utgangsgrensesnitt | 100Base-FX |
Nettverksstandard | IEEE 802.3,IEEE 802.3u |
Ethernet interface type | Raskt Ethernet |
Ethernet LAN dataoverføringshastigheter | 10,100 Mbit/s |
Duplekssystem | Full, Halv |
Tilkoblingsevne |
---|
Tilkoblingsteknologi | Koblet med ledninger (ikke trådløs) |
Antall ethernets-/bredbåndstilkoblinger (RJ-45) | 1 |
Fibre Channel-porter | 1 |
Fiberoptisk kontakt | SC |
Ytelse |
---|
Maksimal overføring avstand | 2000 m |
Bølgelengde | 1310 nm |
Fibermodusstruktur | Multi-modus, Enkeltmodus |
Fiberkabeldiametere som støttes | 9/125,50/125,62.5/125 µm |
Tx effekt (min.) | -23,5 dBmW |
Tx effekt (maks.) | -14 dBmW |
Følsomhet | -31,8 dBmW |
Design |
---|
Intern | Nei |
Produktfarge | Svart |
Energihåndtering |
---|
Strømstyrke | 5 V |
Innput-strøm | 2 A |
Vekt og dimensjoner |
---|
Bredde | 97 mm |
Dybde | 69 mm |
Høyde | 26 mm |
Vekt | 200 g |
Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et
generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er
forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som
gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er
uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.