Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her

MOXA TCF-142-M-SC

MOXA TCF-142-M-SC (TCF-142-M-SC)
MOXA TCF-142-M-SC (TCF-142-M-SC)
MOXA TCF-142-M-SC (TCF-142-M-SC)
MOXA TCF-142-M-SC (TCF-142-M-SC)

MOXA TCF-142-M-SC

Varenr.:
TCF-142-M-SC
EAN:
5703431434196
2 787,-
2 229,60 ekskl. mva
Vårt lager på Kalbakken (PUP) Ikke på lager Leverandørlager (1-3 arbeidsdager) Ikke på lager
Fyll inn postnummer og klikk knappen for å vise frakt priser
Beskrivelse

TCF-142 Series

RS-232/422/485 to optical fiber media converters

Features and Benefits

  • “Ring” and “Point-to-Point” transmission
  • Extends RS-232/422/485 transmission up to:
  • 40 km with single-mode—TCF-142-S
  • 5 km with multi-mode—TCF-142-M
  • Compact size
  • Decreases signal interference
  • Protects against electrical interference and chemical corrosion
  • Supports baudrates of 50 bps to 921.6 Kbps
  • Wide temperature models available (-40 to 75°C)

Introduction

The TCF-142 media converter is equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multi-mode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time.

Automatic Baudrate Detection

The TCF-142 can automatically detect the serial baudrate. This is an extremely convenient feature. Even if a device’s baudrate is changed, the signal will still be transmitted through the media converter without any data loss.

Ring Operation

The TCF-142 can be used to connect serial devices to a fiber ring. To form the ring, connect the Tx port of one TCF-142 to the Rx port of a neighboring converter. Once the ring is set up, simply use the DIP switches to configure the TCF-142 converters for “ring mode.” When one node transmits a signal, the signal travels around the ring until it returns back to the transmitting unit, which then blocks the signal. With the TCF-142, you can set up fiber rings that have a total circumference of up to 100 km.

Automatic Data Direction Control (ADDC®)

ADDC® is a patented hardware data flow solution developed by Moxa to handle RS-485 data direction control. ADDC® senses and controls RS-485 data direction automatically, making it unnecessary to use the hand shaking signal.

• RS-232/422/485 Side
Connector(s) Terminal Block
RS-232 Signals Tx, Rx, GND
RS-422 Signals TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w Signals TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Signals Data+, Data-, GND
Baudrate 50 bps to 921.6 Kbps
ESD Protection 15 KV for all signals
• Optical Fiber
Fiber Connector SC or ST
Cable Requirements Single-mode: 8.3/125, 8.7/125, 9/125, or 10/125 μm
Multi-mode: 50/125, 62.5/125, or 100/140 μm
Transmission Distance Single-mode: 40 km
Multi-mode: 5 km
Wavelength Single-mode: 1310 nm
Multi-mode: 850 nm
Tx Output Single-mode: > -5 dBm
Multi-mode: > -5 dBm
RX Sensitivity Single-mode: -25 dBm
Multi-mode: -20 dBm
Point-to-Point Transmission Half-duplex or full-duplex
Ring Transmission Half-duplex
• Physical Characteristics
Enclosure Aluminum (1 mm)
Dimensions Without ears: 67 x 100 x 22 mm (2.64 x 3.94 x 0.87 in)
With ears: 90 x 100 x 22 mm (3.54 x 3.94 x 0.87 in)
• Environmental Limits
Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Operating Humidity 5 to 95% RH
Storage Temperature -40 to 85°C (-40 to 185°F)
• Power Requirements
Input Voltage 12 to 48 VDC
Power Consumption 140 mA @ 12 V
Voltage Reversal Protection Protects against V+/V- reversal
Power Line Protection 2 KV Burst (EFT), EN61000-4-4
2 KV Surge, EN61000-4-5
Over Current Protection 1.1 A (protects against two signals shorted together)
• Regulatory Approvals
EMI EN55022 1998, Class B
EMS EN61000-4-2 (ESD), Criteria A, Level 2
EN61000-4-3 (RS), Criteria A, Level 2
EN61000-4-4 (EFT), Criteria A, Level 2
EN61000-4-5 (Surge), Criteria A, Level 3
EN61000-4-6 (CS), Criteria A, Level 2
EN61000-4-11(DIPS), Criteria A, Level 2
UL/CUL UL60950-1
TUV EN60950-1
FCC Part 15 Subclass B
• Warranty
Warranty Period 5 years

  Model No. Description

TCF-142-M-SC

RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and SC connector

TCF-142-M-ST

RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and ST connector

TCF-142-S-SC

RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and SC connector

TCF-142-S-ST

RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and ST connector

TCF-142-M-SC-T

RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and SC connector, -40 to 75°C temperature range

TCF-142-M-ST-T

RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and ST connector, -40 to 75°C temperature range

TCF-142-S-SC-T

RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and SC connector, -40 to 75°C temperature range

TCF-142-S-ST-T

RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and ST connector, -40 to 75°C temperature range

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.