Mobil, Tele & Tilbehør

HARDWARE PACK METAL BASE 4 QTY HARDWARE

Skruvset för fot/topp. Består av 4 skruvar + låsbrickor.

Skruvset för förlängningsdelar. Består av 2 skruvar + muttrar och 1 insexnyckel.

Skruvset för montering av hållare eller MultiMoveClip. 4 skruvar + muttrar och 1 torx-nyckel ingår.

POWER CORD RETAINING HARDWARE PACK

Distansplatta, 42x50x7 mm. Med förborrade AMPS hål.

UNPKD 4 QTY. SHOULDER WASHERS

Vingmutter till PM-fäste. Med distansplatta för montering på t.ex sugkopps fäste med AMPS-hål.

Set med 5st distansplattor för montering på t.ex sugkopps fäste med AMPS-hål.

RAM 1" NPT END CAP

RAM HARDWARE FOR XM RADIO

The RAP-319U is a composite adapter that is designed to narrow the rail width of RAM u-bolts to a minimum of 0.5".

Springöppnare verktyg, stor.

Universalfäste med V-spår för knapp och clip. Med förborrade hål.

Bladsäkring 2 A med säkringshållare.

HARDWARE PACK FOR METAL BASES

RAM 1.11 OD X 6" LONG BLACK PVC PIPE

RAM 1.11 OD X 2" LONG BLACK PVC PIPE

RAM 1.11 OD X 4" LONG BLACK PVC PIPE

The RAM® X-Grip® is one of the best-selling, most trusted device mounts on the market. The RAM® X-Grip® provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environments, you can ensure added piece-of-mind with the RAM® X-Grip® Tether. The RAM® X-Grip® Tether is recommended for out-of-cockpit applications where excessive wind and G-force could cause movement of the device within the holder. It’s also great if you just want a little added stability and vibration control when capturing video from the mount. The Tether is made of high-strength elastomeric material and fits around the RAM® X-Grip® holder for easy device insertion.

Förlängningsplatta, 149x69x5 mm.

Förlängningsplatta, 145x50x5 mm. Med förborrade AMPS-hål.

Förlängningsplatta, 80x50x5mm. Med förborrade AMPS hål.

Förlängningsplatta, 155x50x5mm. Med förborrade AMPS hål.

Förlängningsplatta,100x50x5mm. Med förborrade AMPS hål.

Förlängningsplatta, 155x50x5mm. Med förborrade hål.

Förlängningsplatta, 155x50x5mm. Med förborrade hål.

MultiMoveClip. Med frigörelseknapp.

MultiMoveClip: monteringsadapter till hållare utan kulled. Passar hållare med två vertikala hål (EJ AMPS).

POWER BOX POWER TIP 5.5MM OD X 2.5MM ID

The coupler is to combine 2 RAP-B-200-1U and/or RAP-200-1U to form a double socket arm with the capability to rotate 360° in the center of the arm. This will also give the ability to have a B size 1” ball socket on one side and a C size 1.5” ball socket on the other. This is intended for light duty uses.

UNPKD RAM NON SLIP BEARING KIT

The RAP-S-KEY3-4U replacement key knob is compatible with the RAP-S-KNOB3-4, RAP-S-KNOB3-4U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 4 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEY3-5U replacement key knob is compatible with the RAP-S-KNOB3-5, RAP-S-KNOB3-5U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 5 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEY3-6U replacement key knob is compatible with the RAP-S-KNOB3-6, RAP-S-KNOB3-6U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 6 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEY3-7U replacement key knob is compatible with the RAP-S-KNOB3-7, RAP-S-KNOB3-7U and RAP-S-KNOB3/RAP-S-KNOB3U mixed combination security knobs that contain the 7 node security pattern. Please verify the node security pattern on your security knob before purchase.

The RAP-S-KEYN5-4U replacement key knob is compatible with 2.25"/3.38" diameter D/E size arms and mounts that contain the RAM® Pin-Lock™ security nut. Verify the correct replacement key knob by matching it's node number pattern with the node number pattern found on the security nut.

The Center Loader allows for the connection of two Extruded Aluminum Tough-Track™ systems in a straight line and provides a loading point to insert track bases. Hardware not included.

The RAM-to-Garmin double ball adapter arm will attach to the EZ-Strap™ base, making it a complete mounting system for Garmin GPS devices that contain a factory mounting bracket that accommodates the Garmin "G-Ball". The overall length of the SHORT arm adapter is 1.43".

Monteringsadapter för MultiStäll. Skruvar ingår. 50x60x8 mm.

Monteringsadapter Hona med AMPS-standard hål. Till 215053.

Monteringsadapter Hane med AMPS-standard hål. Används med procukt 215053, 215054 eller 215055.

Vingmutter till PM-fäste.