C–UNIKat–230 Features: Quality Construction — 4 shielded twisted pairs (U/FTP) of 23AWG solid copper conductors are cabled together in an unshielded outer jacket. Optimized for Kramer Hardware — Use with any of Kramer’s wide range of twisted pair digital transmitter–receiver sets (DGKat™ and HDBaseT). High–Quality Shielded RJ–45 Connectors — 50u gold plated contacts. Varied Selection of Length — 1.8 to 100m (6–328ft). Specifications: FEET 70.00m (230ft) CONSTRUCTION Conductors: 4 x 2 x 23AWG, annealed copper Outer Diameter: 0.56± 0.01mm (0.022in) Insulation Material: Skin/foam/skin HDPE Outer diameter: 1.33 ± 0.10mm (0.052in) Color: Per TIA/EIA 568–B Screening: Alu/PET per pair (Alu side out) Drain Wire: 90% tinned copper, outer diameter: 0.4 ± 0.01mm (0.016in) Jacket: LSHF, blue RAL5012 THICKNESS ≥0.5mm (0.020in) DIAMETER 7.2 ± 0.2mm (0.284in) PHYSICAL Maximum Pulling Tension: 100N Bending Radius: Installation 60mm (2.36in), installed 50mm (1.97in) Thermal Characteristics: Storage/transport/installation 0° to 50°C (32° to 122°F), operation — 20°to 60°C (–4° to 140°F) REGULATORY Electrical: EIA/TIA 568A, ISO/IEC 11801 Fire Performance: IEC 60332–1 Smoke Density: IEC 61034 Halogen Free: IEC 60754 ELECTRICAL Impedance: 1–100MHz : 100 ± 15Ω Impedance: 100–250MHz : 100 ± 20Ω Impedance: 250–500MHz : 100 ± 50Ω Propagation Velocity: 76% Mutual Pair Capacitance: ≤42pF/m Capacitance Unbalanced Pair/Ground: ≤1500pF/km Max. Conductor DC Resistance: <79.8Ω/km Pair Resistance Unbalance: DC <1.5% Dielectric Strength: 2.5kV DC (2s) Insulation Resistance: >5000MΩ/km Voltage Rating: 30V