Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her

INTER-TECH Geh S-3901 Impulse 1x120mm RGB-Lüfter

INTER-TECH Geh S-3901 Impulse 1x120mm RGB-Lüfter (88881272)

INTER-TECH Geh S-3901 Impulse 1x120mm RGB-Lüfter

Varenr.:
88881272
EAN:
4260455641371
Ekspertomtaler: 2 omtaler
  • Strømforsyning 0W
  • Type Tower
  • Farge Sort
1 526,-
1 220,80 ekskl. mva
Vårt lager på Kalbakken (PUP) Ikke på lager Leverandørlager (1-3 arbeidsdager) Ikke på lager
Fyll inn postnummer og klikk knappen for å vise frakt priser
Beskrivelse

S-3901 Impulse


88881272

Are you looking for a special case, that moves your lighting concept into new spheres? Then the S-3901 Impulse is just right for you!
A slightly tinted Tempered Glass side panel and two RGB LED strips, which run over the front panel and the whole top of the case, make the S-3901 the ideal candidate for a high-end system with elaborate LED lighting. This is not only due to the standard 120mm RGB LED fan, that is installed on the rear panel, but also because of the digital 5V RGB control board, which accommodates up to 7 additional RGB fans, which are managed via the RGB motherboard control header. Space for up to four additional 3-pin fans round off the connection variety of the integrated circuit board.
In the top of the case are, in addition to the LED strips, fixed dust filter inserts and the controls. In addition tot wo USB 2.0 and USB 3.0 ports and HD audio jacks, there is a slider to set the fan speed (Off/Low/High) and a switch for manually switching through the LED effects. Another removable dust filter under the power supply and a variety of ways to lay the cables, complete the offer.


Features:

  • Front panel and top with two RGB light strips
  • Side panel made of Tempered Glass
  • 1x 120mm RGB fan at the rear included
  • 3pin RGB header connector for 5V RGB motherboard control
  • LED switch to change colour effects
  • RGB control board for up to 7 additional RGB fans and four 3pin fans
  • Manual fan control via slider in the top
  • Two 3.5" bays below the motherboard carrier with separate airflow
  • Place for water cooling in sizes of 120mm and 240mm
  • Power supply adapter in a separate cage in the bottom part
  • Openings for easy laying of cables
  • Easy removable dust filter below the power supply
  • Slot plates screwed and mesh grid
  • Stands


Specifications:

Size
  • Form factor ATX, mATX, ITX
  • Dimensions (h/w/d) 505 x 215 x 455mm
Installation Dimensions
  • Height CPU cooler (max.) 175mm
  • Length graphics card (max.) 275mm
Drive Bays
  • 5.25" external no
  • 3.5" external no
  • 3.5" internal 2x
  • 2.5" internal 2x
Front connectors
  • USB 3.0 2x
  • USB 2.0 2x
  • Card Reader no
  • Microphone 1x
  • Headphones 1x
Power supply
  • ATX-PSU no
Fan mounting option
  • Front 3x 120mm or 2x 140mm (optional)
  • Rear 1x 120mm (serial, RGB, 6pin connector)
  • Top 2x 120mm or 2x 140mm (optional)
Guarantee / Warranty
  • Warranty 24 months

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.