AUDIO-TECHNICA AT-LP120XUSB
|
|
AUDIO-TECHNICA AT-LP120XUSB
3 509,-
2 807,20 ekskl. mva
Vårt lager på Furuset (PUP)
Ikke på lager
Leverandørlager (1-3 arbeidsdager)
Antall
1
|
AT-LP120XUSB
Features:
- Experience the high-fidelity audio of vinyl
- Direct-drive, DC servo motor
- Fully manual operation
- Adjustable dynamic anti-skate control
- Selectable 33/45/78 RPM speeds
- Professional-grade anti-resonance, die-cast aluminum platter with felt mat
- AT-HS6 universal ½"-mount headshell and AT-VM95E Dual Magnet™ phono cartridge with 0.3 x 0.7 mil elliptical stylus
- AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
- Balanced S-shaped tonearm with hydraulically damped lift control and lockable rest
- Built-in switchable phono pre-amplifier for phono- or line-level output
- Stroboscopic platter with speed indicator
- Variable pitch control with quartz speed lock
- Removable plug-type target light for easier cueing in low light
- Damped base construction for reduced low-frequency feedback coloration
- AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
- Convert your vinyl records to digital audio files by downloading and using the free Mac- and PC-compatible Audacity recording software (or software of your choice)
- Includes: USB cable, detachable RCA output cable (dual RCA male to dual RCA male), AC adapter, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover
Specifications:
- Type 3-speed, fully manual operation
- Motor DC servo motor
- Drive Method Direct drive
- Speeds 33-1/3 RPM, 45 RPM, 78 RPM
- Turntable Platter Die-cast aluminum
- Starting Torque >1.0 kgf.cm
- Braking System Electronic brake
- Wow and Flutter <0.2% (WTD) @ 3 kHz (JIS)
- Signal-to-Noise Ratio >50 dB
- Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
- Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec
- Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
- USB Function A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable;
- Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above
- Power Supply Requirements 100 to 240 V, 50/60 Hz, 1.5A Max.
- Dimensions 452.0 mm (17.80") W x 352.0 mm (13.86") D x 141.6 mm (5.57") H
- Weight 8 kg (17.6 lbs.), without dust cover
- Accessories Included AT-VM95E phono cartridge; AT-HS6 headshell; 1.9 m (6.2') USB cable; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter; plug-type stylus target light
- Notes Tonearm type: Balanced S-shaped tonearm with detachable headshell
- Effective arm length: 230.5 mm
- Overhang: 16 mm
- Tracking error angle: Less than 3 degrees
- Applicable cartridge weight: 3.5-8.5 g
- Anti-skating range: 0-4 g
- Replacement Stylus: AT-VMN95E
- USB operation system requirements
- PC or Mac with an available USB port (USB1.1 or higher)
- Windows 7 or above, or Mac OS X or above
Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et
generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er
forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som
gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er
uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.